English
Deutsch
Français
Español
Русский
Italiano
Nederlands
Polski
中文
100L Two Vessel Brewhouse
Configuration：
2 Vessel Brewhouse (MLT+KWT)
3 Vessel Brewhouse (MLT+KWT+HLT)
Main purpose: Home brewing use/recipe researching
Batch size：100L/brew (cold wort output)
Heating method: Electric/steam
Installation: Skid mounting
Assorted support unit：Full grain handling unit;
Cellar configuration: 100L/200L CCT or others
The 100L Brewhouse system is developed with the purpose as below:
Basic brewhouse unit combined with a few tanks, which can be used for home brewing or basic recipe researching in the brewery with big system.
The full configured brewhouse, with 4 to 5 vessels configuration and equipped with other units, can be used in the researching center, university, or bigger breweries who wants further recipe development.
The brewhouse configuration is with either manual or pneumatic valves, and configured with PID PLC system, Automation is flexible as investors exact request.
Installation of whole brewhouse unit is compact, easy to operate by just one person.
Based on the possible request on big variety on brewing recipe and style, the system volume and configuration is more flexible.
Utilities can be fully configured to make the whole system more compact. Or it can be well combined with exist brewing system.
Modular design&mounting
Small floor plan saving
Bigger flexibility on system configuration
Easier combination with exist system
Easy to operate&flexible brewing experience
100L Home brewing system | |||
Brewhouse | |||
Mash/Lauter tun | 100L | 1 pc | Flat lid, easy open Insulated tank Filter plate inside Side spent grain out door Optional: Lauter tun stir, top mounted, VFD control Vessel installation: On legs, or skid mounted Optional: Cone top, with glass manway installed |
Kettle/whirlpool tank | 100L | 1 pc | Flat lid, easy open Insulated tank Electric heater inside, heating speed； 1degree/min Evaporation: 4-8% Optional: Steam heat, with steam jacket on cylinder and bottom parts. Optional: Cone top, with glass manway installed |
Heat exchanger | 200L/H | 1 set | Single stage/dual stage Configured with basic aeration unit. |
Pumps | 1-3m³/h | 2 sets | Centrifugal pump |
Valves | DN32/25 | Assorted | Valve type 1: Manual butterfly valve Valve type 2: Pneumatic butterfly valve |
Piping | DN32/25 | Assorted | For the whole brewhouse connection Standard: DIN11851 |
Water station | |||
Hot water tank | 200L/300L | 1 pc | Size: 2-3 times of brewhouse size Function:Water supply for mashing in&sparging Insulated tank, with steam jacket or electric heaters as exact requested heating method. |
Hot water pump | 1m³/h | 1 set | Centrifugal pump SS304L pump head |
Pneumatic valves and sensors for basic automation brewing
Skid mounted brewhouse
Installation on full platform