English
Deutsch
Français
Español
Русский
Italiano
Nederlands
Polski
中文
200-300L Brewing System
Capacity：200L/300L per brew
Configuration：
Option 1: Mash tun/lauter tun+kettle/whirlpool tank
Option 2: Mash/boiling tank+lauter/whirlpool tank
Heating method: Steam/electric/gas heating
Structure：Pre assembled or skid mounted
Control unit: PID control panel or PLC panel
Material: SUS304/304L
The 200-300L brewhouse used either for home brewing or recipe researching of big breweries.
The system designed by ZYB is easy to operate and meanwhile always with good guarantee on beer brewing quality.
It is more customized as the preference of different brewers request.
We make the whole brewhouse unit designed on skid or being flexible as special layout request.
A possible automation update can be customized and be well combined with the exist big system.
More customization on heating method
Design for big plato range
Small floor plan&Easy to operate
A big plato range as different recipe request.
Flexible heating method as facility request.
200L-300L Brewhouse system | |||
Brewhouse | |||
Mash/Lauter tun | 200-300L | 1 pc | Cone or domed seal top Tor stir with shaft connector to lower twist force Support leg wit adjustable leg bolts |
Kettle/whirlpool tank | 200-300L | 1 pc | Cone or domed seal top Tangent wort inlet Two clean wort outlet Support leg wit adjustable leg bolts |
Heat exchanger | 600L/H | 1 set | Double stage, with aeration unit |
Lauter pump | 1m³/h | 1 set | Centrifugal pump, VFD control |
Mash/wort pump | 3m³/h | 1 set | Centrifugal pump, VFD control |
Steam condenser | DN200 | 1 set | Installed with kettle for wort condensing With spray nozzles Cold water spraying while boiling process. |
Wort grant | 10L | 1 set | Visible glass |
Valves&piping | DN32/25 | Assorted | Manual butterfly valve Quantity as exact brewing process design. |
Water station | |||
Hot water tank | 100-600L | 1 pc | Material: SUS304 Insulated on top, cylinder, bottom Heating method: Steam jacket; Steam coil Hot water storage from wort cooling. Optional: Three times of Brewhouse capacity. |
Hot water pump | 3m³/h | 1 set | Centrifugal pump SS304L pump head Optional: Extra backup pump for efficiency or in case of maintaining. |
Cellar system | |||
Fermenters | 300L 600L | / | Quantity to be defined as exact request Cylinder&conical fermenters 25-30% head space Adjustable leg bolts Glycol cooling jacket for both cylinder and conical bottom Automatic temp control Glycol system well combined with exist chiller unit. SS hard piping or PPR for glycol loop setup. |
Control system | |||
Main Control panel | 1 set | Stainless steel material, IP55/65 | |
Fitting brand: | / | PLC: Siemens or Allen-Bradley Speed controller: Danfoss/Beckhoff/Allen-Bradley Low voltage: Schneider Control panel: TUV or UL/CUL certified Other customization possible | |
Skid mounting
Automatic control system
Cold water system for wort cooling
Copper or partial copper cladding
PLC control panel